How to Install Metal Roofing?

If you want to update your roof and give it a new look, then metal roofing can be the best upgrade option available to standard asphalt shingles.

Buy why you should choose metal roofing only?

This is because metal roofing offers countless benefits to its consumers. Metal roofing conserves energy and it can withstand the harmful elements for decades. 

On the contrary, the installation process of metal roofing is totally advanced. You can call it a DIY project as it is very complicated and difficult. 

I would recommend you to complete the metal roofing installation project with the help of two or three helpers and make sure to use the fall protection equipment that is designed for roof work.

In this article, you will get to learn about the types of metal roofs and step by step guide on how to install metal roofing. 

All the instructions added in this guide are closely related to the metal panel installation. 

So, let’s start the process. Before jumping towards our main topic we should first check out the necessary material for the metal roofing installation process.

What You Will Need?

If you are installing a metal roof on your own then you will require a couple of tools and materials. The detail is mentioned below:

Tools required:

  • Claw Hammers
  • Drip Edge 
  • Transition Flashing
  • Vent Pipe Flashing

Gutter Accessories

Patches and Sealants

Materials Required:

  • Work Boots
  • Welding Gloves
  • Safety Glasses and Sunglasses

Now follow the step by step guide below to install metal roofing.

Take A Look At The Options Available

While you are seeking to install metal on your house, but before starting the process it is essential to take a look at different types of metal roofs available.

For example, you can consider the following options of metal roofs for your house:

  • Tin
  • Copper
  • Aluminum
  • Steel
  • Zinc

Measure Your Roof

In the next step, take a measuring tool to find out the length and breadth of your roof from the outside ground.

Note down the readings somewhere. Calculate the area and multiply it by the slope. 

In this way, you will get total square footage in your roofing project. After that order the roofing supplies as per your square footage to avoid wastage of material.

Make sure that you are getting started with a square during the metal installation process.

Remove The Old Roofing

Start removing the old roofing and shingles. Takedown the large nails and inspect the roof to check whether it needs any aid or repair or not.

Install Edges and Shingles

Cover the outlines of your roof by using metal strips. Place them in the corner pieces where both panels meet and bend at the edge of your roof.

After that adjust the metal roofing panel.

Start from the larger edge and adjust other shingles afterward.

Install roofing screws and tighten them. After that install new panels and keep on adding them until your roof is totally covered.

Install Flashing and Ventilation

Use a roof ventilation kit to create ventilation for your roof. Place the cover over the vent and adjust them in the right position.

Flashing helps you to fit the joints of two sections where your roof meets. It helps water to get dry right away. When it comes to installing metal roofing on your home or business, it’s best to contact a professional roofing company that knows what they’re doing and can get the job done easily.

Leave a Reply

Your email address will not be published. Required fields are marked *